Mustang Exhaust - From The Header To The Tailpipe
In terms of popularity, upgrading the exhaust of a Mustang is second only to replacing the wheels. It doesn't matter if you are changing out the mid-pipes or replacing the whole system --when you own a Mustang, you want the exhaust system to last and sound good. To get these results, you will need to improve and/or replace the components of your exhaust. What are the different components of the mustang exhaust?
The Mustang exhaust system is much more intricate than a few pieces of metal connected with bolts. There are many different functions performed by the mustang exhaust, the following being among the most important. They blow the hot air emitted by your engine away from the car. They reduce harmful emissions and limit the output of noise. The exhaust system is integral in increasing airflow through the engine. The faster air flow increases through the engine, the better your car performs.
How are these things done by the exhaust system? It is accomplished by the pushing of the gases, beginning in the engine and continuing through to the pipes and mufflers, and ending by going out of the car. The mustang exhaust system has three main parts. It doesn't matter what year your mustang was built, they all have the same set-up. It is strongly recommended that both of the headers be upgraded and a cat-back exhaust be used. Your performance will definitely improve. As a bonus, you may get better sound and fuel efficiency.
We begin with the manifolds. This piece is connected to the exhaust ports, and joins the waste gases from all of the cylinders into a single location. Some people will refer to this piece as the "mustang headers". Despite the fact the names are both used, they actually refer to two slightly different things. Manifolds force the gases into a single chamber at maximum speed and pressure. The headers consist of tubes which allow the gases to flow at their own pace, like water through a drain.
The next component, which is something included in each and every mustang exhaust, is the mid-pipe. when the gases depart the manifold, this is where they go. Equalization of exhaust pulses is the main purpose of having this. They are bursts of exhaust from the engine to the pipe, which allows the engine to produce more power while also helping the system run more efficiently.
The third component is known as the mustang catback, which is bolted on to the back of the catalytic converters. The entire assembly is made up of the mufflers and the tailpipes, this is the final place that the vicious gases created by the engine come to. There are many products available aftermarket for performance upgrading of headers, exhaust and intake, the best source would be to click the links that you find in this article or resource box.
An exhaust upgrade is the way to make your Mustang look and sound great. The exhaust in your Mustang controls sound and emissions, and impacts performance because of air flow through the intake and exhaust system. Headers and a cat-back exhaust will improve performance, that Mustang sound, and fuel efficiency. Mustang headers smooth and synchronize the mustang exhaust to the mid-pipe. The mustang catback reduces back-pressure beyond the catalytic converter. Together these components can give you better performance, better efficiency, and that great sound. Click on the links here to find the best sources for upgrading your Mustang for a hot rod rumble that rocks.
Published March 27th, 2008
