Various Articles

So you are really ready to do, you are really going to change your oil all on you own.Well, I say good for you!You can do it, it is so much easier than mechanics want you to think.

They like you to bring you car in so they can get you on all the other services they have.And these are services you can do yourself as well.This article will tell you how to change oil in a quick and easy way.

You will need to go to your auto parts store to get 5 quarts of name brand oil.You also need to purchase a very high quality oil filter, don't go with the cheaper ones.Also ask for an oil filter wrench or a metal strap wrench. Also get something to catch the oil with, preferably something that will seal.

Time to get to work.Check to see that you will be able to fit to work under your car.You might need to jack up the front some, best to have some supports.

Always have someone there in case of accidents.First you need to remove your oil cap.Now you can crawl under.

You will want to place the oil tray under the oil plug.Remove the plug, this will be at the lowest point of the oil pan.Allow the oil to drain, this will take several minutes.

When the oil is completely drained, go ahead and put the plug back in.Do not screw it in too tight.Slide the tray under the oil filter.Oil will leak as you pull the filter out.

Using your filter wrench, you will want to turn the oil filter counter clockwise.Once it is loose enough, remove it using your hands.Remember, oil will be coming out, so have your tray ready.

Your new filter will have a rubber gasket.Coat the entire gasket with some of the new oil.This will make it easier to remove on the next oil change.

Time to screw the new oil filter on using only your hands.Now you are ready to screw in the new oil filter.Turn it clockwise until you feel it tight.Using your wrench, tighten it another ¼ to 1/2 a turn to make sure it is sealed.Now you can come out from under your car.Time to fill up with your new oil.You are ready to put your new oil in.It should take 5 quarts.

Put your cap on and then turn on your engine and let it run for about 5 minutes.After that, check your dip stick. Now you have discovered how to change oil all by yourself and have nice clean oil in there.With nice clean oil, you are ready to go.